The degradation of water resources has become a common problem. The conventional methods of water quality monitoring involves the manual collection of water sample from different locations. These water samples were tested in the laboratory using the rigorous skills. Such approaches are time consuming and no longer to be considered efficient. Moreover, the current methodologies include analysis of various kinds of parameters of water quality such as physical and chemical. The old method of water quality detection and communication was time consuming, low precision and costly. Therefore, there is a need for continuous monitoring of water quality parameters in real time. By focusing on the above issues, a low cost water quality monitoring system is developed and designed that can monitor water quality in real time using IOT. In the proposed system water quality parameters are measured by the different sensors such as pH, turbidity, dissolved oxygen and temperature for communicating data onto a platform via microcontroller system i.e. Arduino model. So in order to meet all these requirements, other technologies can be used such as MQTT (Message Queuing Telemetry Transport) which allows publishing and subscribing od data between the sensor and end device. Instead of using GSM network or any other technology, MQTT algorithm will be implemented to make the system feasible, modular, scalar and cost-efficient. Not only this , with the help of MQTT algorithm there will be simultaneous flow of data between the sensors and server.