In the following paper, an effort has been made to do the comparative analysis of hex mesh and tetrahedral mesh of a guide bracket to decide which mesh type to prefer in order to get accurate results in considerably less time. To analyze whether there is a significant impact of using hex dominant mesh and tetrahedral mesh. The bracket used in the analysis is modeled using solid works 2018 and the finite element analysis is done using “ANSYS 2020 R2 student workbench”. From the finite element analysis, I witnessed that there was a significant difference in the processing time of the two types of mesh and other parameters such as stress and strain were also having a noticeable increase with respect to results in the tetrahedral mesh. The results will thus help to gain knowledge on which mesh is best for future meshing on various models.