A Physical method using solar-powered is applied to revamp the used engine oil by the process of sedimentation in addition to the filtration process through the micron oil filter combined with different filtration processes and finally by heating the oil to the 40℃temperature to evaporate all the water contents. The friction between rubbing parts is one of the important factors in contamination of oil due to contamination barium and sulphure content is increased if that oil is used in the engine then there is an increase in carbon, ash, soot content in oil which are highly toxic &cause pollution to the summit if not filtered also the dumping of used oil into the soil can lead to degradation & barren of land & if the same oil leads to waterways via drainage the one gallon of waste oil is capable of polluting 10 million gallon water also revamping aids benefit to the consumer by being able to use that same oil, hence adds benefits to consumer by being able to use that same oil hence adds benefits to both nature & consumers.