Today most things are electrified and at the same time demand for the electricity is rapidly increasing. So, to overcome this deviation between generating capacity and demand, we need to increase the generation of electricity. These sudden changes in the energy demands and forecast can be met with the implementation of Renewable energy sources in less time. This is the reason nowadays the world running towards renewable energy generation sources like Solar, Wind, etc. Renewable energy generation is a Carbon-free emission. Generation with Solar PV System could be a solution to overcome energy demand day by day. As the solar PV system is depending on Sun and weather conditions, so it gives low and varying which provides a lower efficiency compared with the other energy sources, An MPPT technique plays an in increasing the output of the solar PV system by tracking the maximum power that could generate at the point of the instance of solar irradiance. An optimum point will be determined at which the maximum power point is defined, and it may vary with cell temperatures and insulation levels at a certain PV Array voltage. The work of an MPPT is to extract the maximum power from the optimal point of the solar PV array to increase the output from the system. Our motto is two eliminate the difference between, load demand and generation. So, by using MPPT Techniques along with Distributed Generation system we can achieve this. Distributed generation system is nothing but a generating station near load centers. By this technique, we install solar generating stations in rural areas and they will connect with the main supply grid, so we will distribute the electricity without interruption.