This paper is published in Volume-5, Issue-1, 2019
Area
Production Engineering
Author
Vimal Kishor Kumawat, Jogendra Choudhary
Org/Univ
Rajasthan Institute of Engineering and Technology, Jaipur, Rajasthan, India
Keywords
MIG, Process parameters, Welding time box-bhenken design, ANOVA analysis
Citations
IEEE
Vimal Kishor Kumawat, Jogendra Choudhary. Effect and analysis of process parameters on welded joints made by MIG welding process using design of experiment method, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.
APA
Vimal Kishor Kumawat, Jogendra Choudhary (2019). Effect and analysis of process parameters on welded joints made by MIG welding process using design of experiment method. International Journal of Advance Research, Ideas and Innovations in Technology, 5(1) www.IJARIIT.com.
MLA
Vimal Kishor Kumawat, Jogendra Choudhary. "Effect and analysis of process parameters on welded joints made by MIG welding process using design of experiment method." International Journal of Advance Research, Ideas and Innovations in Technology 5.1 (2019). www.IJARIIT.com.
Vimal Kishor Kumawat, Jogendra Choudhary. Effect and analysis of process parameters on welded joints made by MIG welding process using design of experiment method, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.
APA
Vimal Kishor Kumawat, Jogendra Choudhary (2019). Effect and analysis of process parameters on welded joints made by MIG welding process using design of experiment method. International Journal of Advance Research, Ideas and Innovations in Technology, 5(1) www.IJARIIT.com.
MLA
Vimal Kishor Kumawat, Jogendra Choudhary. "Effect and analysis of process parameters on welded joints made by MIG welding process using design of experiment method." International Journal of Advance Research, Ideas and Innovations in Technology 5.1 (2019). www.IJARIIT.com.
Abstract
In industry welded joints are the most important part for making products. Welded joints are made by the various processes like TIG, MIG, spot resistance welding, arc welding process etc. For the present research study, MIG welding process is selected for analysis the welded joints. Three process parameters are selected for this study which is feed rate, gas flow rate and gap among pieces. The design of experiment method is selected for making the experiment table. The method is BB response surface method. In this method, low center and high levels are selected. Total of 30 experiments is generated using this DOE approach. One response parameter welding time is measured for this research study. Model equation generation using adequacy check is also conducted in this research study.
