This paper is published in Volume-4, Issue-6, 2018
Area
Civil Engineering
Author
Achal Jain, Nitin Thakur
Org/Univ
Om Institute of Technology and Management, Hisar, Haryana, India
Pub. Date
30 November, 2018
Paper ID
V4I6-1295
Publisher
Keywords
Steel powder, Glass powder, Concrete, Workability, Compressive strength

Citationsacebook

IEEE
Achal Jain, Nitin Thakur. Effect of partial replacement of sand by glass powder and steel powder over the properties of M-30 concrete, International Journal of Advance Research, Ideas and Innovations in Technology, www.IJARIIT.com.

APA
Achal Jain, Nitin Thakur (2018). Effect of partial replacement of sand by glass powder and steel powder over the properties of M-30 concrete. International Journal of Advance Research, Ideas and Innovations in Technology, 4(6) www.IJARIIT.com.

MLA
Achal Jain, Nitin Thakur. "Effect of partial replacement of sand by glass powder and steel powder over the properties of M-30 concrete." International Journal of Advance Research, Ideas and Innovations in Technology 4.6 (2018). www.IJARIIT.com.

Abstract

In the present research, a series of experiments had been performed to compare the use of glass powder and steel powder as partial replacement of sand in different proportions. Concrete mixes are modified by 10%, 15% and 20% and 25% of glass powder and steel powder in replacement. The inclusion of glass powder increases the compressive strength up-to certain proportions. It has also been noted that with the increase in the content of glass powder decreases the slump value or workability. It has also been noted that with the increase in the content of supplementary materials decreases the slump value or workability. Comparatively higher early strength gain (7-days) is obtained with steel powder concrete.