IOT Based Theft Detection using Raspberry Pi
Security and safety has always become a basic necessity for urban population. To Monitor and to detect we use CCTV camera’s. In surveillance, CCTV camera is costly because of the use of computer. It reserves too much space for continues recording and also require manpower to detect the unauthorized Activity. To overcome, we came across with Raspberry PI using IOT. Compare to Existing System Raspberry Pi is much cheaper with better resolution and low power consumption features. This Project “IOT based theft detection project using Raspberry Pi” where we use image processing on live video to detect theft using motion and also highlight the area where motion occurred. In this system, we use a camera along with raspberry pi along with a circuit with LCD display IR for night vision and USB drive for storage. As soon as camera motion is detected in camera, the system uses image processing to detect exact area of motion occurrence and highlights it accordingly. The system now transmits the images of the occurrence over IOT to be viewed by user online. Also, it stores the footage in a USB drive for further reference. The user can now decode the data sent online using IOT, IOT system to view the images of the motion occurrence live remotely over internet. Thus, the system provides an innovative approach to Theft Detection using IOT.
Published by: Umera Anjum, B. Babu
Author: Umera Anjum
Paper ID: V3I6-1188
Paper Status: published
Published: November 7, 2017
Effect of Jaggery on Strength of Concrete
Concrete is a composite material used in the grounds that all considerate designing structures are developed with concrete. This report accentuation that by utilizing locally accessible materials like jaggery, may enhance the properties of concrete. The experiment has been completed for assessing the quality properties of concrete utilizing Jaggery as admixtures into the concrete creation. Normally these sorts of admixtures utilized as a part of the extraordinary cases like huge wharf and long heaps. Four unique rates of admixtures (Jaggery) are picked in the experimentation as, 0.1%, 0.2%, 0.3%and 0.4% by weight of cement with M20 and M25 grade, mix design of concrete. At last it was presumed that work-ability and compressive strength of concrete upgraded when admixtures Jaggery included into the concrete synthesis.
Published by: Fouziya Qureshi, Anil Kumar Saxena, Gourav Soni
Author: Fouziya Qureshi
Paper ID: V3I6-1201
Paper Status: published
Published: November 7, 2017
Implementation of Pull-Up/Pull-Down Network for Energy Optimization in Full Adder Circuit
Nowadays the requirements of energy-optimized low power circuits in higher-end applications such as communication, IoT, biomedical systems etc., there are several techniques used to implement energy optimization in low power circuits but the static power dissipation needs to improved such kind of circuits. The conventional topology has been implemented in basic logical gates but the delay and power much higher in each individual cell. Now we proposed an unbalanced pull-up and pull-down network in full adder circuit using symbols. These techniques were employed to reduce the static power dissipation and switching delay in each individual cell. The design was implemented in Cadence virtuoso TMSC 180nm CMOS technology and it’s obtaining the total power dissipation 5.128nW. The pull-up and pull-down network used to reduce the static power dissipation in full adder is used to improve the operating speed of each individual.
Published by: P. Aarthi, R. Suresh Kumar, Dr. N. J. R Muniraj
Author: P. Aarthi
Paper ID: V3I6-1198
Paper Status: published
Published: November 7, 2017
Efficient Implementation of Full Adder for Power Analysis in CMOS Technology
In recent days, the real-time application and fast arithmetic operations require highly efficient arithmetic hardware architecture to improve the system performances. The adder plays a vital role in digital circuits, the earlier hardware architecture using conventional CMOS and transmission logic gate based full adder design. Moreover, the techniques using more number of transistors and consume larger power and delay so we proposed the techniques pass-transistor logic and transmission gate based hybrid pass logic. The hybrid technique is used to reduce the number of the transistor, so the delay and power consumption will be reduced when compared with the earlier techniques. The proposed technique design was implemented using 16 transistors in 180nm CMOS technology and it consumes 8.2075nW power and the delay reduced to 5.0146ns
Published by: Kaleeswari .S, K. Saranya, Dr. N. J. R Muniraj
Author: Kaleeswari .S
Paper ID: V3I6-1194
Paper Status: published
Published: November 7, 2017
Porcelain Laminates Veneers: Case Report
The print and electronic media are bombarded with models exhibiting perfect smiles. People are giving a lot of importance to the red and white aesthetics i.e., the teeth and the gums. Multiple options are available to treat the problems arising in the highly aesthetic zone.This article describes the restoration of four upper anterior teeth with porcelain veneers. The current porcelain veneers are esthetically superior, conservative and durable treatment modality. Because such treatment is usually elective, all precautions should be taken to ensure treatment is as conservative as possible. Present Case report discusses a patient having discoloration of the teeth in the maxillary arch in the anterior region.
Published by: Dr. Raisa Rashid, Dr. Waseem-Ul- Ayoub, Dr. Imtiyaz Magray
Author: Dr. Raisa Rashid
Paper ID: V3I6-1164
Paper Status: published
Published: November 6, 2017
Device-to-Device Communication (Pen drive) without PC
In present days, computers and laptops has become an inseparable part of our busy life. One of the commonly used device for data transfers is Universal Serial Bus(USB) flash drives. Due to emerging technology, USB devices are shrinking in size day by day, but not the equipment’s which is required to access them. Data transfer using portable devices is the most important factor of today's scenario. Data transfer between two pen drives is generally done using laptops or desktops. But it is not always possible to carry such a large size device to the particular location. So, to overcome this problem, we are designing a hardware which is more compact to carry anywhere. With the help of this project we cannot only transfer the data between devices but also, we can see the transfer of the particular file which we want to send by using LCD display. This system pen drive to pen drive data transfer without PC is done by using Raspberry Pi. The pen drives are connected to USB module through USB hub, the communication between two pen drives is done by using Raspberry Pi. Using this System, the data transfer can be done from any place in world.
Published by: Vanaparthy Upendhar, Anand Babu
Author: Vanaparthy Upendhar
Paper ID: V3I6-1187
Paper Status: published
Published: November 6, 2017
