Manuscripts

Recent Papers

Research Paper

Power System Loss Minimization Using Flower Pollination Algorithm(FPA)-A Comparative Study

There are various methods has been attained by integrating Distributed Generation (DG) in distribution systems. These methods help to reduce power losses and improve voltage profile of the system. Desirable results can also be achieved and enhanced if optimally sized DGs will be located in the systems. This paper presents a distribution generation (DG) allocation strategy to improve node voltage and power loss of radial distribution systems using flower pollination algorithm (FPA). The main objective is to minimize active power losses while keeping the voltage profiles in the network within specified limit.

Published by: Amandeep, Shavet Sharma, Akshay Rana

Author: Amandeep

Paper ID: V3I2-1245

Paper Status: published

Published: March 20, 2017

Full Details
Research Paper

Stochastic Economic Load Dispatch using Pareto Distribution with Multiple Fuels Local Convex by Bacterial Foraging Optimization

In this paper, Stochastic Economic Load Dispatch problem with Multiple Fuels is solved using Pareto distribution with local convex optimization by bacterial foraging approach. Bacterial foraging optimization is swarmed intelligence technique used to solve the problem of the power system. The algorithm is based on the group foraging behavior of Escherichia coli (E-coli) bacteria present in the human intestine. This social behavior of E-coli bacteria has been used to solve optimization problems. This paper presents a BFO to solve Economic load dispatch (ELD) problems. The result is obtaining from test system with ten generating units. In this paper performance of the BFO is compared with Particle swarm optimization (PSO). The result clearly shows that the proposed method gives a better optimal solution as compared to the other methods.

Published by: Akshay Rana, Shavet Sharma, Amandeep

Author: Akshay Rana

Paper ID: V3I2-1244

Paper Status: published

Published: March 20, 2017

Full Details

Congestion Control in Wireless Communication with Multiple Radio Interfaces

Congestion control is a basic requirement for wireless communication. A number of devices need to communicate using loss-less and lower drop rate paths. Ubiquitous and wireless access to the internet was the major step taken by the introduction of the Third generation of Mobile cellular network. Still, there are some challenges due to different characteristics and prerequisites of the wired and wireless network. An important element of Network is Congestion control. Congestion control has to ensure network stability and achieves fair distribution of resources among users of the network. TCP is a well-known protocol used in networks for reliable transport and for congestion control. During almost any interaction network is used by users. Network designs using TCP-like congestion control protocols should ensure time bound and successful transaction/communication of data between users. Nowadays, people are concerned about flow completion within minimum time. People are not concerned about network efficiency, network throughput, and packet drop rate or packet delivery ratio. In this paper, we represent various possible approaches used for congestion control in the wired and wireless network.

Published by: Ms. Pranali Ghadge, Suraj Kurde, Ms. Vrushali Uttarwar, Ms. Supriya Padwal

Author: Ms. Pranali Ghadge

Paper ID: V3I2-1238

Paper Status: published

Published: March 17, 2017

Full Details

Energy Efficient Vehicle with Antitheft and Accident Control System

Security, especially the security of vehicle has become a matter of concern. An efficient automotive security system is proposed for anti-theft using an embedded system integrated containing face recognition system with Global Positioning System (GPS) and Global System for Mobile Communication (GSM).This proposed work is an attempt to design and develop a smart anti-theft system that uses face recognition system to prevent theft and to determine the exact location of the vehicle using GPS. GSM system is also installed in the vehicle for sending the information to the owner because GPS system can only receive the vehicle location information from satellites. The owner can lock or unlock his vehicle with the help of SMS. There is also accident control system which will control speed and not allow the car to dash on the car or obstacle in front. The minimum distance is maintained between the cars by matching their speeds. By maintaining the distance vehicle collision can be avoided. Also, the gasses from the exhaust are wasted so the motion of waste gasses from the exhaust pipe is used to generate power to give battery backup for system inside the vehicle.

Published by: Tushar Gajanan Tayade, Manoj Sonune

Author: Tushar Gajanan Tayade

Paper ID: V3I2-1237

Paper Status: published

Published: March 16, 2017

Full Details

Doctor Patient Interaction System for Android

The establishment and improvement of doctor-patient interaction system is a very important requirement, especially when the communication technology is developing rapidly. The advantages of the web can be l useful to make up the time and distance between doctors and patients and to provide fast and adequate medical services. Through the connection between user terminals and specific service, both doctors and patients are able to obtain required data to achieve a better interaction. The platform, Web services, and database technology are all gradually maturing so that we can develop a doctor- patient interaction system for Android to meet the needs of the patient and to provide Communication with patients by the doctor's more efficient and convenient means of communication with patients.

Published by: N. Bhuvaneswari, M. Latha, E. Ranjith

Author: N. Bhuvaneswari

Paper ID: V3I2-1236

Paper Status: published

Published: March 16, 2017

Full Details
Research Paper

IOT Based Waste Management for Smart Cities

Many times we see in the societies the garbage bins or dustbins are placed at public places in the cities. sometimes they overflow due to increasing in the waste or garbage. There is no automatic system to inform that dustbin is full to garbage office. In IOT based waste management proposed system, we are using smart dustbins to overcome this garbage problem. In this, the garbage vehicle has a GPS module and all information about the location of the dustbins if one of the dustbins is get filled then this dustbin informs the status of garbage to the garbage vehicle as well as garbage office through the internet. As soon as the garbage vehicle get information then it goes to the appropriate location and collects the waste or garbage.

Published by: Swapnil Kuwar, Nikam Mangesh, Patil Avinash, Godse Avinash

Author: Swapnil Kuwar

Paper ID: V3I2-1235

Paper Status: published

Published: March 16, 2017

Full Details
Request a Call
If someone in your research area is available then we will connect you both or our counsellor will get in touch with you.

    [honeypot honeypot-378]

    X
    Journal's Support Form
    For any query, please fill up the short form below. Try to explain your query in detail so that our counsellor can guide you. All fields are mandatory.

      X
       Enquiry Form
      Contact Board Member

        Member Name

        [honeypot honeypot-527]

        X
        Contact Editorial Board

          X

            [honeypot honeypot-310]

            X