Manuscripts

Recent Papers

Research Paper

Laboratory investigation on bituminous concrete mixture properties by modifying bitumen using waste plastic flakes

This paper presents the results of a laboratory study on how effectively the plastic waste could be utilized in bituminous concrete course to improve the properties of bituminous mixture. It has been shows that the addition of plastic waste flakes results in the improved Marshall Stabilities and flow value. The OBC for plain bitumen mixture was 5.33, while for plastic blended bituminous mixture for (i.e., bitumen+ plastic) 80%+20%, 60%+40% and 40%+60% was 6.67, 6.00 and 5.50 respectively. For all mix maximum stability, minimum flow, mean air voids and mean voids filled with bitumen were determined. It was observed that 80% Bitumen+20% Plastic blended mixture has shown very good increased stability value of 48% increase when compared to reference bitumen mixture. The overall result shows that, Marshall Stability value has increased with bitumen mixture modified with plastic waste and the flow value has decreased.

Published by: Supriya C. B., Prakash J., B. H. Manjunath, T. V. Mallesh

Author: Supriya C. B.

Paper ID: V7I4-1530

Paper Status: published

Published: July 26, 2021

Full Details
Research Paper

Design and implementation of All-Optical T-flip-flop using Photonic Crystals Waveguides

High-speed communication has a lot of limitations because of slow electronic components. As a solution to these limitations, optical components will be used for high switching speed, low power consumption and large bandwidth, instead of electrical components. We have developed a photonic crystal T-shaped waveguide design to implement T flip-flop. Utilizing optimized parameters such as silicon rod radius and refractive index, this design has been analysed and examined. To implement this structure, the optical interference effect is utilized at a wavelength of 1550 nanometers. This design operates at the refractive index of 3.46 and silicon rod radius of 0.114, giving the best output value with an 14.78dB contrast ratio. Using Finite Difference Time Domain (FDTD) and plane wave expansion, the designed flipflop is simulated

Published by: D. Gowri Sankar Rao, P. Rupa Anjali, M. V. V. Satya Sai, Haridasu Ankarao

Author: D. Gowri Sankar Rao

Paper ID: V7I4-1525

Paper Status: published

Published: July 26, 2021

Full Details
Research Paper

Imperatives of AI in the classroom

Artificial Intelligence is a very vast field in computer science i.e intelligence in performing tasks that typically require human intelligence. This paper will describe how the education sector uses AI and how it will change the experience of learning for the student as well as for the teachers. The approach of the implementation of AI(Artificial Intelligence) on the education system. This paper also describes the AI technologies used in the education system and brings new changes and new platforms of learning and provides different standards of learning things. And how the education sector is readjusting AI technologies for a better learning experience.

Published by: Tanuja Anna, Deepansh Pandey

Author: Tanuja Anna

Paper ID: V7I4-1531

Paper Status: published

Published: July 26, 2021

Full Details
Research Paper

Bikers Portal

This is an online Bike and bike parts store that has listings of various bike along with their features. It also consists of Bike service Registration. This system allows user to buy bike, bike parts and inventory online. System allow user to check various articles submitted by user and even comment on them. Credit card payment facility is available. This system also consists of ‘Rent a Bike’ feature where user can ask admin for bike on rent. The visitor who visits the system must register himself by filling up personal details. After registration user can login to the system with his username and password in order to access the system. User can check various bike listing and can view each bikes feature. User can also check the features of the bike as well as inventory parts, and accessories. User may select the product and can add the product to shopping cart. User can make payment through credit cards by clicking on credit card payment option. User must register himself for posting an article. This application is a combination of both sales and inventory management of the bike and bike parts. User can easily purchase bike or bike parts by using this system user does not have to come manually to shop to purchase the product. He can view the bike and bike parts in effective Graphical User Interface. User can view features of each product and can compare the products in order to purchase a better product.

Published by: Ankit Bougal, Abhishek S. K., Lakshminarayan, Chempavathy B.

Author: Ankit Bougal

Paper ID: V7I4-1477

Paper Status: published

Published: July 24, 2021

Full Details
Research Paper

Design and Development of Gas detection alert with SMS using Arduino

The idea behind our project is to give a solution by power cut the gas provision as soon as a gas leakage is perceived apart from activating the sounding alarm. In addition to this, the authorized person will receive a message informing him about the leakage.

Published by: Pooja Dnyaneshwar Lambatkar, Kajal Ravikant Chavan, Tejashwini Atmaram Salunkhe, Dipali Maruti Pachangane, Vaishnavi Sunil Mohite

Author: Pooja Dnyaneshwar Lambatkar

Paper ID: V7I4-1502

Paper Status: published

Published: July 24, 2021

Full Details
Research Paper

GEOGRAPHICAL POSITIONAL AND PREDICTIVE ACCURACY OF A SHOVEL BUCKET

Excavators are increasingly being equipped with guiding and automation systems on modern building sites. Recent research has focused on comparing the bucket tip estimation results with the motion measuring method of the boom, stick, and bucket, as well as sensor selection. The method of measuring the cylinder length of the boom, stick, and bucket, as well as the method of measuring the cylinder length of the boom, stick, and bucket, were chosen for this study. The methods of measuring the cylinder length of the boom, stick, and bucket, as well as the method of directly measuring the boom, arm, and bucket, were chosen for this study. These methods are commonly used in guidance and automation systems. To apply the aforesaid methods to a commercial excavator, a low-cost sensor that can be mounted and detached in a modular manner was used. KS best fit predictive test has been conducted for predictive positioning .A default data sheet has been acquired. The entire model was prototyped and designed over a CAD model presented in Solid works.

Published by: Arko Banerjee, Sahil Yadav

Author: Arko Banerjee

Paper ID: V7I4-1515

Paper Status: published

Published: July 24, 2021

Full Details
Request a Call
If someone in your research area is available then we will connect you both or our counsellor will get in touch with you.

    [honeypot honeypot-378]

    X
    Journal's Support Form
    For any query, please fill up the short form below. Try to explain your query in detail so that our counsellor can guide you. All fields are mandatory.

      X
       Enquiry Form
      Contact Board Member

        Member Name

        [honeypot honeypot-527]

        X
        Contact Editorial Board

          X

            [honeypot honeypot-310]

            X