In Fluid Dynamics, we can classify the flows in different ways, but we have two flows that remain pristine, these are Pulastle flow and Continous Flow. Pulsatile flow is the one in which the flow is represented by cycles, whereas the Continous Flow is represented by a straight line. In this paper, Pulsatile flow is feed to the Inlet boundary as a varying sinusoidal wave with a constant amplitude and angular velocity. The feasibility of the model can be increased as we have can use a cosine wave instead of a sinusoidal wave according to the requirement. This setup gives a detailed explanation as to how to set up for the simulation and analysis of the Pulsatile flow. The results of the following setup can be obtained by using the Post-Processing in Ansys Fluent.